List of products by brand MAGURA

Magura company is based in Germany and creates hydraulic disc brakes many years. Magura made so much legendary brakes like their famous hydraulic rim brake model HS33 and also Magrua MT brakes. Magura also created electronic seatpost or hydraulic fork.

Magura company is based in Germany and creates hydraulic brakes many years. Magura made so much legendary brakes like their famous hydraulic rim brake model HS33. Magura also created electronic seatpost or hydraulic fork.

Active filters

MAGURA washer below brake caliper | 0,2mm

Price 9 Kč

Distancing spacer with 0,2mm hight for a centering of a brake caliper or differenc components. Can be used on many types of calipers with IS or PM mount. You can get most from the braking force if you pads contact the whole rotor surface. Spacer is made from steel and inner diameter is in size...

Olive for Maguar hose

Price 14 Kč Regular price 15 Kč

Olive for brake hoses Magura. Olive can be used for kevlar and also plastic Magura hoses. You will use this olive after cable shortening or new installation / replacement of master. Olive will press the hose inside the lever or caliper thanks to sleeve nut, so the hose is firmly connected to the...

  • -10%
  • -10%

Bolt M6 for Magura HS caliper bleed port

Price 15 Kč Regular price 17 Kč

Bold Magura for closing of bleed port in caliper Maguar HS11, HS22, HS33, HS33 R and Gustav M. Bold have M6 screw and head with inbus key or torx T25. Bold is made from durable steel and is possible to use it repeatedly.

  • -10%
  • -10%

Washer for MAGURA EVO2 adapter booster

Price 19 Kč

Washer for MAGURA EVO2 adapter booster of hydraulic rim brakes MAGURA HS11, HS22, HS33. Washer is used below the bolt head which tighten the booster to the MAGURA EVO2 adapter (upper bolt). Sold by 1pc of washer.

MAGURA washer below brake caliper | 1mm

Price 19 Kč

Washer 1mm high to support the brake or other components. It fits under different types of brakes and is used to center it. Thanks to the pads you can achieve better braking effect or the brake pads can sit on the full surface of the disc. The washer is made of steel and the diameter of the inner...

MAGURA HS cylinder washer | EVO adapter

Price 20 Kč Regular price 22 Kč

Magura rim brake washer for Magura hydraulic rim brakes HS11, HS22, HS33 calipers. Washer is made from durable plastic and it is mounted directly on the calipers body. You can adjust the distane and angle of the calipers easily thanks to the washer. Also the washer helps to keep the calipers...

  • -10%
  • -10%

Sleeve nut for MAGURA MT and HS brake levers

Price 23 Kč Regular price 25 Kč

Sleeve nut Magura for hydraulic rim brakes Magura HS11, HS22 and HS33 and also complete Magura MT series made from Carbotecture® material. Sleeve nuts keeps the hose with olive inside the lever and press the olive inside. Sleeve nut M9 is made from durable steel and it is possible to use it...

  • -10%
  • -10%

MAGURA washer below brake caliper | 3mm

Price 27 Kč

Washer 3mm high to support the brake or other components. It fits under different types of brakes and is used to center it. Thanks to the pads you can achieve better braking effect or the brake pads can sit on the full surface of the disc. The washer is made of aluminium alloy and the diameter of...

Hose cover for MAGURA MT and HS

Price 27 Kč Regular price 30 Kč

Spare part for MAGURA HS rim hydraulic brakes or MAGURA MT disc brakes. Brake lever hose cap to prevent breakage at the hose fitting. The cap slides onto the fitting and wraps tightly around it.

  • -10%
  • -10%

Sleeve nut for Magura rim brake calipers | M8 x 0,75

Price 27 Kč Regular price 30 Kč

Sleeve nut for rim brake calipers of Magura HS11, HS22, HS33 and also RT6 and RT8. Sleeve nut nut hose tightening in the caliper. Sleeve nut will help you with tightening of olive on the hose and seal the whole braking system. Sleeve nut is made for all models of hydraulic rim brakes Magura.

  • -10%
  • -10%

Brabed fitting with M6 screw for Magura hose

Price 36 Kč Regular price 40 Kč

Original barbed fitting with m6 screw for Magura hose. This barbed fitting is used with all brakes which uses plastic hose like rim brakes Magura HS11, HS22, HS33, HS33 R, or MT2. Barbed fitting should be pressed in the hose with special tool or inside vise with proper adapters and hammer.

  • -10%
  • -10%

Transparent MAGURA tube for brake bleeding | 250mm

Price 50 Kč

MAGURA brake bleed tube made of hard plastic, length 250mm. The tube is transparent, so it is possible to check the movement of bubbles during brake bleeding. This tube is supplied as standard in MAGURA bleed kits. Ideal for use in combination with a MAGURA threaded bleeding barbed fitting for...

Bleed bolt EBT for calipers MAGURA MT

Price 45 Kč Regular price 50 Kč

Spare original MAGURA bolt in EBT bleed port for disc brake calipers MAGURA MT (all models 2015 / 2017 / 2019 / 2-piston / 4-piston). Small bolt is made from steel and keeps the fluid inside the braking system. BE AWARE! Tightening torque of this bleed port bolt is max. 4Nm, or you can damage it!

  • -10%
  • -10%

MAGURA MT disc brakes hose insert / support sleeve

Price 45 Kč Regular price 50 Kč

Barbed fitting (insert) for Magura disc brakes. You can use this insert for all disc brakes from Magura MT family (excluding MT2). Easy instalation in the hose without tools or with a small tap with a hammer. Olive and shroud nut is sold separately.

  • -10%
  • -10%

Bleeding and filling bolt MAGURA MT and HS

Price 55 Kč

Bleeding and filling bolt / barbed fitting MAGURA for all disc brakes Magura MT and Magura HS rim brakes. Bolt have a shorter thread M6 and it is supplied with 2x o-ring which better seals the system when connected to caliper. O-ring is possible to put on the bolt thread side. We recoomend to use...

Syringe for bleeding brakes | 30ml | with hole

Price 80 Kč

Syringe for easier work during bleeding brakes. Syringe have a volume 30ml and on the outer side is printed scale for better view on the volume of the fluid inside the syringe. Made from plastic. We do recommend to use this syringe only with brakes which are filled with mineral oil. The syringe...

Syringe for bleeding brakes | 30ml

Price 80 Kč

Syringe for easier work during bleeding brakes. Syringe have a volume 30ml and on the outer side is printed scale for better view on the volume of the fluid inside the syringe. Made from plastic. We do recommend to use this syringe only with brakes which are filled with mineral oil.

Banjo screw for MAGURA MT brakes with rotatable tube connection

Price 90 Kč Regular price 100 Kč

Replacement screw for banjo hose connection to MAGURA MT brake caliper with rotatable connection. The screw is hollow with a drilled hole for the passage of mineral oil through the brake system. The screw can be tightened with a torx T25. The maximum tightening torque for the MAGURA MT banjo is 3Nm!

  • -10%
  • -10%

Covers of hose and connectors for Magura HS master cylinder

Price 90 Kč Regular price 100 Kč

Covers of hose and also bots and connectors for Magura HS11, HS22 and HS33 brak calipers. Covers are made from plastic and keeps the bolts and hoses in save on critical places. Supplied as a pair (left + right) resp. for install on 1 brake. Covers are made for Magura HS11, HS22 and HS33 hydraulic...

  • -10%
  • -10%

BAT plug kit | for Magura MT brakes

Price 108 Kč Regular price 120 Kč

BAT plug kit for brakes Magura MT, which covers the hole after removing BAT kit (lever bite point adjustement - short / long). You will use this BAT plug if you are changing for HC3 lever, or you don't want to use your BAT adjustement. Plug kit covers hole and ensures the lever will stay on its...

  • -10%
  • -10%

MAGURA washer below brake caliper | 1,5mm | set 2pcs

Price 90 Kč Regular price 100 Kč

Set of 2pcs 1,5mm high washers for caliper / brake pads or other components. Fits under different types of brakes and is used to center it. Thanks to the shims, you can achieve better braking effect or the brake pads sitting on the full surface of the disc. The washer is made of steel and the...

  • -10%
  • -10%