Hoses and fittings

Original braided HOPE brake hose for all HOPE brake types. Outer diameter 5mm. Inner plastic line, braided sheathing and outer covering with rubber tubing to prevent puncture and damage to the hose. The hose is very strong and hardly stretches at all even under high pressure! The hose can be...

HOPE 5mm hose shroud. Spare part number HBSP158. The shroud is designed for 5mm HOPE hose. The shroud perfectly tightens the complete fitting, olive with barbed fitting and connects the hose to the lever or caliper. The shroud is made of steel and can be tightened with a conventional 8mm wrench.

Spare part of HOPE hydraulic brake fittings number HBSP159 - hose olive. Thanks to the olive, the hose will be perfectly pulled onto caliper or lever and the brake system will be sealed at the connection of the hoses to the lever or caliper.

Replacement insert for brake hydraulic hose HOPE. HOPE spare part number - HBSP160. The support sleeve is designed for all types of HOPE hoses (steel braided and kevlar). The support sleeve is inserted into the inner bore of the hose and requires tightening with a olive (HBSP159) and a shroud nut...

Copper seal / washer for HOPE brake hoses. The copper seal / washer has the manufacturing designation HBSP161. The seal is used for connecting HOPE brake hoses to various types of brakes. The seal is soft and perfectly seals the connection to prevent brake fluid from leaking out of the system.

Straight HOPE fitting connector for 5mm brake hoses - part number HBSP163. The connector is designed for all types of HOPE hoses (braided and Kevlar). The connector is fitted to HOPE brake levers and connects the hose to the brake lever using copper seals. The connector is tightened with a...

Genuine HOPE brake hose for all HOPE brake types. Outer diameter 5mm. Inner plastic line, Kevlar sheathing and outer covering with plastic-rubber tubing to prevent puncture and damage to the hose. The hose is very strong and hardly stretches at all even under high pressure! The hose can be...

Copper washer or seal for HOPE brake lines. The gasket has the serial number HBSP26. The gasket is used to fit many types of HOPE brake lines. The gasket seals the connection perfectly to prevent any brake fluid leakage!

Hollow bolt for HOPE banjo - part number HBSP47. The screw is designed for banjo connection of the hose to the caliper. The bolt is hollow with a hole to allow smooth flow of brake fluid between the hose and caliper.

Replacement brake hose for HOPE brakes for XCR Pro model with X2 caliper and rotatable banjo. The hose comes with a pre-pressed rotatable banjo. This is the standard 5mm kevlar hose that comes with the HOPE XCR Pro brakes. The hose is 1600mm long and can be shortened at the lever to the length...

HOPE swivel banjo for 5mm hoses - part number HBSP162. Thanks to the swivel banjo, it is possible to turn the hose at the caliper connection in the desired direction, so that the connection screw does not interfere with the hose when riding, or does not scrape against the wheel, frame. The bolt...

HOPE swivel banjo for 5mm hoses - part number HBSP162. Thanks to the swivel banjo, it is possible to turn the hose at the caliper connection in the desired direction, so that the connection screw does not interfere with the hose when riding, or does not scrape against the wheel, frame. The bolt...

HOPE swivel banjo for 5mm hoses - part number HBSP162. Thanks to the swivel banjo, it is possible to turn the hose at the caliper connection in the desired direction, so that the connection screw does not interfere with the hose when riding, or does not scrape against the wheel, frame. The bolt...

HOPE swivel banjo for 5mm hoses - part number HBSP162. Thanks to the swivel banjo, it is possible to turn the hose at the caliper connection in the desired direction, so that the connection screw does not interfere with the hose when riding, or does not scrape against the wheel, frame. The bolt...

HOPE swivel banjo for 5mm hoses - part number HBSP162. Thanks to the swivel banjo, it is possible to turn the hose at the caliper connection in the desired direction, so that the connection screw does not interfere with the hose when riding, or does not scrape against the wheel, frame. The bolt...

HOPE swivel banjo for 5mm hoses - part number HBSP162. Thanks to the swivel banjo, it is possible to turn the hose at the caliper connection in the desired direction, so that the connection screw does not interfere with the hose when riding, or does not scrape against the wheel, frame. The bolt...

Hollow bolt for HOPE banjo - part number HBSP47. The screw is designed for banjo connection of the hose to the caliper. The bolt is hollow with a hole to allow smooth flow of brake fluid between the hose and caliper.

HOPE swivel banjo for 5mm hoses - part number HBSP162. Thanks to the swivel banjo, it is possible to turn the hose at the caliper connection in the desired direction, so that the connection screw does not interfere with the hose when riding, or does not scrape against the wheel, frame. The bolt...

Complete set of braided brake hoses HOPE including end fittings and screw connections. This is a braided hose HOPE with a diameter of 5 mm. The brake hose is 2000 mm long. The hose also includes end caps and fittings, which are already pressed onto the hose, so you can use it immediately with...