Mounts and fittings

Copper washer or seal for HOPE brake lines. The gasket has the serial number HBSP26. The gasket is used to fit many types of HOPE brake lines. The gasket seals the connection perfectly to prevent any brake fluid leakage!

Copper washer or seal for HOPE brake lines. The gasket has the serial number HBSP161. The gasket is used to fit many types of HOPE brake lines. The gasket seals the connection perfectly to prevent any brake fluid leakage!

Olive for brake hoses Magura. Olive can be used for kevlar and also plastic Magura hoses. You will use this olive after cable shortening or new installation / replacement of master. Olive will press the hose inside the lever or caliper thanks to sleeve nut, so the hose is firmly connected to the...

Bold Magura for closing of bleed port in caliper Maguar HS11, HS22, HS33, HS33 R and Gustav M. Bold have M6 screw and head with inbus key or torx T25. Bold is made from durable steel and is possible to use it repeatedly.

Spare part o-ring for brake hose Magura MT (bajo fitting). This o-ring is compactible with Magura MT4, MT5, MT6, MT7, MT8, MT Trail Sport. O-ring is sold singly.

Sleeve nut Magura for hydraulic rim brakes Magura HS11, HS22 and HS33 and also complete Magura MT series made from Carbotecture® material. Sleeve nuts keeps the hose with olive inside the lever and press the olive inside. Sleeve nut M9 is made from durable steel and it is possible to use it...

Sleeve nut for rim brake calipers of Magura HS11, HS22, HS33 and also RT6 and RT8. Sleeve nut nut hose tightening in the caliper. Sleeve nut will help you with tightening of olive on the hose and seal the whole braking system. Sleeve nut is made for all models of hydraulic rim brakes Magura.

Original barbed fitting with m6 screw for Magura hose. This barbed fitting is used with all brakes which uses plastic hose like rim brakes Magura HS11, HS22, HS33, HS33 R, or MT2. Barbed fitting should be pressed in the hose with special tool or inside vise with proper adapters and hammer.

Spare original MAGURA bolt in EBT bleed port for disc brake calipers MAGURA MT (all models 2015 / 2017 / 2019 / 2-piston / 4-piston). Small bolt is made from steel and keeps the fluid inside the braking system. BE AWARE! Tightening torque of this bleed port bolt is max. 4Nm, or you can damage it!

Barbed fitting (insert) for Magura disc brakes. You can use this insert for all disc brakes from Magura MT family (excluding MT2). Easy instalation in the hose without tools or with a small tap with a hammer. Olive and shroud nut is sold separately.

Spare part of HOPE hydraulic brake fittings number HBSP159 - hose olive. Thanks to the olive, the hose will be perfectly pulled onto caliper or lever and the brake system will be sealed at the connection of the hoses to the lever or caliper.

Replacement screw for banjo hose connection to MAGURA MT brake caliper with rotatable connection. The screw is hollow with a drilled hole for the passage of mineral oil through the brake system. The screw can be tightened with a torx T25. The maximum tightening torque for the MAGURA MT banjo is 3Nm!

Hollow bolt for HOPE banjo - part number HBSP47. The screw is designed for banjo connection of the hose to the caliper. The bolt is hollow with a hole to allow smooth flow of brake fluid between the hose and caliper.

Replacement insert for brake hydraulic hose HOPE. HOPE spare part number - HBSP160. The insert is designed for all types of HOPE hoses (steel braided and kevlar). The insert is inserted into the inner bore of the hose and requires tightening with a olive (HBSP159) and a shroud nut (HBSP158) to...

HOPE 5mm hose shroud. Spare part number HBSP158. The shroud is designed for 5mm HOPE hose. The shroud perfectly tightens the complete fitting, olive with barbed fitting and connects the hose to the lever or caliper. The shroud is made of steel and can be tightened with a conventional 8mm wrench.

Swivel banjo HOPE - part number HBSP162. Thanks to the swivel banjo, it is possible to turn the hose at the caliper connection in the desired direction, so that the connection screw does not interfere with the hose when riding, or does not scrape against the wheel, frame. The bolt is hollow in...

Straight HOPE fitting connector for 5mm brake hoses - part number HBSP163. The connector is designed for all types of HOPE hoses (braided and Kevlar). The connector is fitted to HOPE brake levers and connects the hose to the brake lever using copper seals. The connector is tightened with a...

MAGURA MT and HS hose tube connection adapter with which you can have hose from brake lever assembly closer to the handlebars. Thanks to 90° adapter you can have your hose directing to handlebars, so hoses are more safe during fall or crash. Adapter is compactible with disc brakes MAGURA MT from...

MAGURA MT and HS hose tube connection adapter with which you can have hose from brake lever assembly closer to the handlebars. Thanks to 40° adapter you can have your hose almost parallel with your handlebars, so hoses are more safe during fall or crash. Adapter is compactible with disc brakes...

Pressure switch MAGURA in T shape for many purposes, like lights up your brake light or motor cut-off on your e-bike. Pressure switch is supplied with all necessary barbed connections (barbed fittings, shroud nuts, olives) which you will use for the MAGURA hose connection (plastic and also...

T-piece MAGURA for disc brake MAGURA Big Twin (two calipers on one lever) and also hydraulic rim brakes MAGURA HS (all models). Hose from the lever should be inserted in the middle connection and hoses from both sides o T-piece goes to the calipers. Supplied with 3x longer sleeve nut and also 3x...