Hoses and fittings

Olive for brake hoses Magura. Olive can be used for kevlar and also plastic Magura hoses. You will use this olive after cable shortening or new installation / replacement of master. Olive will press the hose inside the lever or caliper thanks to sleeve nut, so the hose is firmly connected to the...

Bold Magura for closing of bleed port in caliper Maguar HS11, HS22, HS33, HS33 R and Gustav M. Bold have M6 screw and head with inbus key or torx T25. Bold is made from durable steel and is possible to use it repeatedly.

Spare part o-ring for brake hose Magura MT (bajo fitting). This o-ring is compactible with Magura MT4, MT5, MT6, MT7, MT8, MT Trail Sport. O-ring is sold singly.

Sleeve nut Magura for hydraulic rim brakes Magura HS11, HS22 and HS33 and also complete Magura MT series made from Carbotecture® material. Sleeve nuts keeps the hose with olive inside the lever and press the olive inside. Sleeve nut M9 is made from durable steel and it is possible to use it...

Spare part for MAGURA HS rim hydraulic brakes or MAGURA MT disc brakes. Brake lever hose cap to prevent breakage at the hose fitting. The cap slides onto the fitting and wraps tightly around it.

Sleeve nut for rim brake calipers of Magura HS11, HS22, HS33 and also RT6 and RT8. Sleeve nut nut hose tightening in the caliper. Sleeve nut will help you with tightening of olive on the hose and seal the whole braking system. Sleeve nut is made for all models of hydraulic rim brakes Magura.

Original barbed fitting with m6 screw for Magura hose. This barbed fitting is used with all brakes which uses plastic hose like rim brakes Magura HS11, HS22, HS33, HS33 R, or MT2. Barbed fitting should be pressed in the hose with special tool or inside vise with proper adapters and hammer.

Spare original MAGURA bolt in EBT bleed port for disc brake calipers MAGURA MT (all models 2015 / 2017 / 2019 / 2-piston / 4-piston). Small bolt is made from steel and keeps the fluid inside the braking system. BE AWARE! Tightening torque of this bleed port bolt is max. 4Nm, or you can damage it!

Support sleeve (insert) for Magura disc brakes. You can use this support sleeve for all disc brakes from MAGURA MT family (excluding MT2 as this brake uses plastic hose without need of the support sleeve). Easy instalation in the hose without tools or with a small tap with a hammer. Olive and...

Replacement screw for banjo hose connection to MAGURA MT brake caliper with rotatable connection. The screw is hollow with a drilled hole for the passage of mineral oil through the brake system. The screw can be tightened with a torx T25. The maximum tightening torque for the MAGURA MT banjo is 3Nm!

Covers of hose and also bots and connectors for Magura HS11, HS22 and HS33 brak calipers. Covers are made from plastic and keeps the bolts and hoses in save on critical places. Supplied as a pair (left + right) resp. for install on 1 brake. Covers are made for Magura HS11, HS22 and HS33 hydraulic...

Replacement brake lever hose covers MAGURA GUSTAV PRO. The covers protect the hose connection at the brake lever against puncture, e.g. during a fall. The covers also prevent the hose from bending too much and damaging it by breaking. The covers are made of softened plastic and can be easily...

Brake hose for MAGURA MT2 a HS (all models) brakes. Hose is made from durable pastic with 5mm diameter. Hose is supplied in lenght 2300mm.

MAGURA MT and HS hose tube connection adapter with which you can have hose from brake lever assembly closer to the handlebars. Thanks to 90° adapter you can have your hose directing to handlebars, so hoses are more safe during fall or crash. Adapter is compactible with disc brakes MAGURA MT from...

MAGURA MT and HS hose tube connection adapter with which you can have hose from brake lever assembly closer to the handlebars. Thanks to 40° adapter you can have your hose almost parallel with your handlebars, so hoses are more safe during fall or crash. Adapter is compactible with disc brakes...

Brake hose for brakes MAGURA MT2. Hose is made from very durable plastic. Supplied in lenght 2300m in black color. Hose is prepared for installation on caliper (with already installed caliper connector) and also in MAGURA MT2 brake lever. Hose is also supplied with olive and shroud nut. Supplied...

Pressure switch MAGURA in T shape for many purposes, like lights up your brake light or motor cut-off on your e-bike. Pressure switch is supplied with all necessary barbed connections (barbed fittings, shroud nuts, olives) which you will use for the MAGURA hose connection (plastic and also...

Brake hose for brakes MAGURA MT SPORT. Hose is made from kevlar. Supplied in lenght 2500m in black color. Hose is prepared for installation on caliper (with already installed caliper connector) and also in MAGURA MT brake lever. Hose is also supplied with olive and hose insert.

T-piece MAGURA for disc brake MAGURA Big Twin (two calipers on one lever) and also hydraulic rim brakes MAGURA HS (all models). Hose from the lever should be inserted in the middle connection and hoses from both sides o T-piece goes to the calipers. Supplied with 3x longer sleeve nut and also 3x...

Kevlar brake hose for MAGURA MT TRAIL SPORT/MT4/MT5/MT6/MT7/MT8 brakes. Black color, 2,5m lenght. Hose is supplied including barbed fittings on both sides for master cylinder and slave cylinder. In set is olive, aluminium banjo and torx bolt and o-rings.