Fittings

Olive for brake hoses Magura. Olive can be used for kevlar and also plastic Magura hoses. You will use this olive after cable shortening or new installation / replacement of master. Olive will press the hose inside the lever or caliper thanks to sleeve nut, so the hose is firmly connected to the...

Replacement sealing O-ring for MAGURA brake hose (swivel banjo). Designed for brake hose fittings and sealing the contact between the fitting and the brake caliper body. The ring is mounted on both sides of the swivel banjo. Thanks to the ring, there is no fluid leakage at the connection between...

Sleeve nut Magura for hydraulic rim brakes Magura HS11, HS22 and HS33 and also complete Magura MT series made from Carbotecture® material. Sleeve nuts keeps the hose with olive inside the lever and press the olive inside. Sleeve nut M9 is made from durable steel and it is possible to use it...

Sleeve nut for rim brake calipers of Magura HS11, HS22, HS33 and also RT6 and RT8. Sleeve nut nut hose tightening in the caliper. Sleeve nut will help you with tightening of olive on the hose and seal the whole braking system. Sleeve nut is made for all models of hydraulic rim brakes Magura.

MAGURA ETT Easy Link for MAGURA hose. The olive can be slipped onto the hose and then clamped by tightening the MAGURA ETT Easy Link sleeve nut and MAGURA ETT Easy Link insert into the hose. The olive is designed for MAGURA hoses with a diameter of 5mm and MAGURA Easy Link or "snap-on" connection...

Original barbed fitting with m6 screw for Magura hose. This barbed fitting is used with all brakes which uses plastic hose like rim brakes Magura HS11, HS22, HS33, HS33 R, or MT2. Barbed fitting should be pressed in the hose with special tool or inside vise with proper adapters and hammer.

Support sleeve (insert) for Magura disc brakes. You can use this support sleeve for all disc brakes from MAGURA MT family (excluding MT2 as this brake uses plastic hose without need of the support sleeve). Easy instalation in the hose without tools or with a small tap with a hammer. Olive and...

Special MAGURA ETT Easy Link insert / threaded screw socket for MAGURA hose. It is a insert that is pressed into the MAGURA hose. The insert is equipped with a thread that is used to tighten the insert with the sleeve nut and presses the olive on the hose. MAGURA Easy Link connection is designed...

Coupling nut for MAGURA ETT Easy Link or for MAGURA 5mm tubing. Spare part number 2703214. The nut is designed for MAGURA 5mm tubing. The nut perfectly tightens the complete fitting, ETT Easy Link olive with ETT Easy Link mandrel which can then be screwed into the brake lever (e.g. GUSTAV PRO)...

Replacement screw for banjo hose connection to MAGURA MT brake caliper with rotatable connection. The screw is hollow with a drilled hole for the passage of mineral oil through the brake system. The screw can be tightened with a torx T25. The maximum tightening torque for the MAGURA MT banjo is 3Nm!

Special MAGURA ETT Easy Link insert / threaded screw socket for MAGURA hose. It is a insert that is pressed into the MAGURA hose. The insert is equipped with a thread that is used to tighten the insert with the sleeve nut and presses the olive on the hose. The MAGURA Easy Link connection is...

MAGURA ETT Easy Link swivel banjo with hose insert. The banjo is used to connect the hose and brake caliper. The swivel banjo is equipped with a insert that must be inserted into the hose. A MAGURA ETT Easy Link olive and sleeve nut are also used for complete sealing. The banjo has small grooves...

Complete set for connecting MAGURA hose and brake lever (e.g. GUSTAV PRO) with MAGURA ETT Easy Link "snap-on" connection. The kit includes all necessary parts such as the olive, the sleeve nut, the hose insert and also the SW5 spanner for attaching the insert to screw on the sleeve nut. The...

MAGURA ETT Easy Link set of banjo with insert, olive, sleeve nut, hollow screw and sealing o-rings. A complete set of parts for connecting the hose to the MAGURA brake caliper. The set includes a swivel banjo with a hose insert, sleeve nut, olive, sealing o-rings, and hollow screw for the banjo...

MAGURA adapter for routing the hose from the brake lever closer to the handlebars. Thanks to the MAGURA 40° adapter it is possible to bring the brake line closer to the handlebar so that the line is more or less parallel to the handlebar. The adapter is compatible with MAGURA MT disc brakes from...

MAGURA MT and HS hose tube connection adapter with which you can have hose from brake lever assembly closer to the handlebars. Thanks to 90° adapter you can have your hose directing to handlebars, so hoses are more safe during fall or crash. Adapter is compactible with disc brakes MAGURA MT from...

Pressure switch MAGURA in T shape for many purposes, like lights up your brake light or motor cut-off on your e-bike. Pressure switch is supplied with all necessary barbed connections (barbed fittings, shroud nuts, olives) which you will use for the MAGURA hose connection (plastic and also...

T-piece MAGURA for disc brake MAGURA Big Twin (two calipers on one lever) and also hydraulic rim brakes MAGURA HS (all models). Hose from the lever should be inserted in the middle connection and hoses from both sides o T-piece goes to the calipers. Supplied with 3x longer sleeve nut and also 3x...