MAGURA MDR-C brake disc with Center Lock mounting for thru axle hubs. We offer MAGURA MDR-C Center Lock brake disc in diameter 160mm, 180mm, 203mm. The disc is designed for all MAGURA MT and GUSTAV PRO series disc brakes and is based on the very well-known MAGURA Storm HC disc type, which is used...

Set of hydraulic brakes MAGURA MT5 and discs STORM HC 180mm+180mm. MAGURA MT5 brake is basic 4-piston brake for All-Mountain, Trail, and Enduro bikes. MT5 is a entry level to MAGURA 4-piston MAGURA MT brake family. It is great brake with a good ration between price and braking power. Brake lever...

Special edition of MAGURA MT5 PRO disc brakes with discs MAGURA MDR-C 203mm + 180mm. The MAGURA MT5 PRO is a modified basic 4-piston brake for All-Mountain, Trail and Enduro bikes. This is the MAGURA MT5 model of 4-piston brakes. This is a great brake in the price/performance ratio. The lever...

MAGURA MDR-C brake disc for MAGURA disc brakes. We offer MAGURA MDR-C disc in diameters 160mm, 180mm, 203mm, 220mm. Compared to the brake disc MAGURA Storm HC model on which this disc is based, it has an additional connecting element (inner ring between the braking surface and the disc mounting...

The MAGURA MDR-P Center Lock is semi-floating disc with steel braking surface and aluminium inner sleeve is made for the most demanding bikes such as enduro, downhill and ebikes. The MAGURA MDR-P brake disc is available in 180mm, 203mm diameters. The MDR-P disc has reduced pad wear and increased...

The MAGURA MDR-P semi-floating disc with steel braking surface and aluminium inner sleeve is made for the most demanding bikes such as enduro, downhill and ebikes. The MAGURA MDR-P brake disc is available in 180mm, 203mm, 220mm diameters. The MDR-P disc has reduced pad wear and increased...

The HOPE Floating Road RX is a special semi-floating disc designed especially for use on road or gravel bikes and possibly also on Cross-Crountry. The outer ring - braking surface is riveted to the aluminium centre sleeve. It is a semi-floating disc, which allows axial movement of the outer ring...

The HOPE Floating Road RX is a special semi-floating disc designed especially for use on road or gravel bikes and possibly also on Cross-Crountry. The outer ring - braking surface is riveted to the aluminium centre sleeve. It is a semi-floating disc, which allows axial movement of the outer ring...

The HOPE Floating Road RX is a special semi-floating disc designed especially for use on road or gravel bikes and possibly also on Cross-Crountry. The outer ring - braking surface is riveted to the aluminium centre sleeve. It is a semi-floating disc, which allows axial movement of the outer ring...

The HOPE Floating Road RX is a special semi-floating disc designed especially for use on road or gravel bikes and possibly also on Cross-Crountry. The outer ring - braking surface is riveted to the aluminium centre sleeve. It is a semi-floating disc, which allows axial movement of the outer ring...

The HOPE Floating Road RX is a special semi-floating disc designed especially for use on road or gravel bikes and possibly also on Cross-Crountry. The outer ring - braking surface is riveted to the aluminium centre sleeve. It is a semi-floating disc, which allows axial movement of the outer ring...

The HOPE Floating Road RX is a special semi-floating disc designed especially for use on road or gravel bikes and possibly also on Cross-Crountry. The outer ring - braking surface is riveted to the aluminium centre sleeve. It is a semi-floating disc, which allows axial movement of the outer ring...

Original HAYES DOT 5.1 brake fluid for HAYES brakes. This fluid is used on almost all HAYES hydraulic brakes and is also included in HAYES brake bleeder kits. The capacity of the container is 473ml, which is plenty for bleeding of complete brake set (front + rear).

Original HAYES DOT 5.1 brake fluid for HAYES brakes. This fluid is used on almost all HAYES hydraulic brakes and is also included in HAYES brake bleeder kits. The capacity of the container is 473ml, which is plenty for bleeding several brakes.

Replacement plug for HAYES caliper / lever bleed port. This plug is used to close the HAYES brake caliper and brake lever bleed ports, or to close the brake system and keep fluid inside the brake caliper and lever. The plug is threaded and screws into the HAYES caliper / lever bleed port with a...

Replacement olives and inserts for HAYES brake hose. Set of 2 olives and 2 inserts in one package. The inserts and olives are made of copper material so that the olive can be easily compresed on the hose after pulling the brake hose shroud nut. The olive and insert are compatible with HAYES brake...

MAGURA GUSTAV PRO brake caliper bleeding valve. The valve is used to open and close the fluid inside the GUSTAV PRO brake caliper. The valve is equipped with a thread and a small o-ring, thanks to which the caliper is sealed against fluid leakage. The head of the valve is designed for an 8mm...

Replacement lid for the expansion reservoir of the HOPE Tech 3 brake lever. The lid comes with 2x M3x8mm screws. The lid is painted with high quality anodized finish and has the HOPE logo laser engraved on the top. The lid can be used on both left and right side, or on both left and right brake...

Replacement lid for the expansion reservoir of the HOPE Tech 3 brake lever. The lid comes with 2x M3x8mm screws. The lid is painted with high quality anodized finish and has the HOPE logo laser engraved on the top. The lid can be used on both left and right side, or on both left and right brake...

Replacement lid for the expansion reservoir of the HOPE Tech 3 brake lever. The lid comes with 2x M3x8mm screws. The lid is painted with high quality anodized finish and has the HOPE logo laser engraved on the top. The lid can be used on both left and right side, or on both left and right brake...

Replacement lid for the expansion reservoir of the HOPE Tech 3 brake lever. The lid comes with 2x M3x8mm screws. The lid is painted with high quality anodized finish and has the HOPE logo laser engraved on the top. The lid can be used on both left and right side, or on both left and right brake...

Replacement lid for the expansion reservoir of the HOPE Tech 3 brake lever. The lid comes with 2x M3x8mm screws. The lid is painted with high quality anodized finish and has the HOPE logo laser engraved on the top. The lid can be used on both left and right side, or on both left and right brake...

Adjusting screw for HOPE brake lever to adjust the distance of the lever from the handlebar and the lever step or the distance of the pads from the brake disc. The screw is made of aluminium alloy. This screw must be secured in the HOPE lever with a locking cotter pin to prevent it from turning...

Adjusting screw for HOPE brake lever to adjust the distance of the lever from the handlebar and the lever step or the distance of the pads from the brake disc. The screw is made of aluminium alloy. This screw must be secured in the HOPE lever with a locking cotter pin to prevent it from turning...