Brzdové destičky MAGURA MDP 8+, green, MT5, MT7, MT TRAIL, CT5, CMe5

• brake pads MAGURA MDP 8+ pads, green compound
• MAGURA MDP 8+ pads, green pads are organic compound (resin)
• MAGURA MDP 8+ pads, black/gray brake pads are designed for dry conditions, but also for wet
• MAGURA MDP 8+ green pads deliver great performance even with heavy eBikes or electric bikes under high temperature loads
• these brake pads are equipped with a special shim that reduces noise and vibrations
• the integrated shim acts as an insulator between the backing plate and the brake caliper piston

Thanks to their properties, these pads will serve you well throughout the year, delivering the stable performance in most conditions. Don't expect extreme bite, but you definitely won't experience any brake slippage. Performance with these pads is very easy to control and won't let you down all year round. If you have a heavy e-bike, e.g. around 25 kg, these pads are designed just for you.

Brake pads bedd-in!

To achieve maximum braking performance, all newly fitted pads need to be run in, an important process that should not be skipped! If the pads are not seated, the pad surface can "glass", which seriously affects the frictional properties of the pads and leads to a deterioration in braking performance.

For this purpose, choose a flat/non-slippery surface without traffic. Run the bike at a speed of approx. 30 km/h. Slow down to a stop with one brake. Brake firmly, but not into a skid. Repeat this procedure at least 30 times with each brake separately. The brake pads and discs will engage and provide optimum braking performance.

Sintered pads take much longer to break in than organic compound (resin) pads. Keep this in mind when purchasing sintered compound pads and extend your break-in time! In general, the more durable the pad compound, the longer the pads will take to run in. Brakes will reach their full to potential after a few runs!

MAGURA plate run-out limit

The limit when MAGURA pads are considered worn or require replacement with new ones is if they are less than 2.5mm high (including the carrier base).

If the pads have less than this amount of compound, we recommend replacing them immediately with new ones to avoid damage to the braking system or injury to the rider!

Pads are compatible with brake calipers

• MAGURA MT5
• MAGURA MT5 PRO
• MAGURA MT5 eSTOP
• MAGURA MT5e
• MAGURA MT7
• MAGURA MT7 PRO
• MAGURA MT7 Raceline
• MAGURA MT7 HC3
• MAGURA MT TRAIL SPORT (přední 4-píst)
• MAGURA MT TRAIL SL (přední 4-píst)
• MAGURA MT CMe5
• MAGURA MT C5

Contents of the package

• 4x MAGURA MDP 8+ pads, gre pads (for 1 brake)
• 2x locking screw for pads in caliper