Brake pads MAGURA 13.S Sport, GUSTAV

• MAGURA 13.S brake pads Sport compound
• MAGURA 13.S Sport brake pads are organic compounds (resin)
• the Sport compound is designed for those who go to the limit and require high braking performance with immediate onset on steep descents regardless of lower power modulation
• MAGURA 13.S Sport pads are designed for performance/racing riders and fast downhill rides as well as where a sharp increase in braking power is required followed by another fast pass
• the pads are suitable if the rider does not stand on the brakes for the entire length of the hill (top to bottom), but gives the pads room to cool down

Thanks to their characteristics, these pads will serve you well all year round, delivering the same stable performance in all conditions - both dry and wet. Don't expect extreme bite, but certainly no brake slippage either. Performance is very well proportioned with these pads and they won't let you down all year round. Plus, they will last you a very long time and their operation will be quiet.

Brake pads bedd-in!

To achieve maximum braking performance, all newly fitted pads need to be run in, an important process that should not be skipped! If the pads are not seated, the pad surface can "glass", which seriously affects the frictional properties of the pads and leads to a deterioration in braking performance.

For this purpose, choose a flat/non-slippery surface without traffic. Run the bike at a speed of approx. 30 km/h. Slow down to a stop with one brake. Brake firmly, but not into a skid. Repeat this procedure at least 30 times with each brake separately. The brake pads and discs will engage and provide optimum braking performance.

Sintered pads take much longer to break in than organic compound (resin) pads. Keep this in mind when purchasing sintered compound pads and extend your break-in time! In general, the more durable the pad compound, the longer the pads will take to run in. Brakes will reach their full to potential after a few runs!

MAGURA plate run-out limit

The limit when MAGURA pads are considered worn or require replacement with new ones is if they are less than 2.5mm high (including the carrier base).

If the pads have less than this amount of compound, we recommend replacing them immediately with new ones to avoid damage to the braking system or injury to the rider!

Pads are compatible with brake calipers

• MAGURA GUSTAV PRO

Contents of the package

• 4x MAGURA 13.S Sport pads (for 1 brake)
• 2x locking screw for pads in caliper

Choosing the right MAGURA brake pads