Brake lever HAYES Dominion A2, A4, black-grey

• brake lever body is made of forged aluminium alloy
• Ergonomic aluminium brake lever with a very soft step thanks to the roller bearings
• the end of the lever is fitted with small dimples at the end for firm contact between the gloved finger and the lever surface
• the lever can be combined with adapters for attaching the gearshift directly to the brake lever sleeve
• the lever can be used on the left or right side of the handlebar (flip-flop)
• the lever can be removed from the handlebars without removing the grips or the shifter
• precision engineered and tested hydraulic axial system using DOT 5.1 brake oil
• Brake lever piston has a conical seal and a special slip ring to reduce friction
• the HAYES Dominion A4 brake lever can be adjusted for the distance between the lever and the handlebars (by turning the wheel on the end lever)
• with the HAYES Dominion A4 brake lever it is possible to adjust the dead lever step using a 2mm inbus key (by default the shortest possible step is set)
• the HAYES Dominion lever has been designed to have the shortest possible deadstroke - i.e. the time without the onset of brake power (pad and disc contact)
• the fluid reservoir is large so that there is no risk of air entering the system even with significant pad wear
• the lever is offered in two variants:
  • Standard reach = standard distance of lever blade from handlebars
  • Short reach = short distance of lever blade from handlebars (for shorter fingers)

Weight

• weight of brake lever = 132g (including olive, hose insert and shroud nut)

Contents of the package

• 1x brake lever HAYES Dominion A2/A4 | black-bronze
• 1x HAYES hose olive
• 1x HAYES hose insert
• 1x HAYES hose shroud nut