Brake disc HOPE Fixed, 6-bolts

The HOPE Fixed standard steel brake disc is an excellent choice for all types of MTB disciplines and riders. The HOPE Fixed brake disc is available in 140mm, 160mm, 180mm, 200mm, 203mm and 220mm diameters. The wide braking area makes it more compatible with other companies' brakes. The braking surface is drilled with holes for better braking performance and pad cleaning, and also helps dissipate the increased heat generated when the pads rub against the disc. The standard HOPE Fixed disc is also very thick or has a braking surface thickness of 2.3mm and a run-out limit of up to 1.5mm, so it can withstand really long and really high temperature loads. The disc is suitable for MTB XC, Trail, Enduro, DH and also for MTB e-bikes or MTB e-bikes. Each disc size is specially modified to handle the increased braking torque.

• HOPE standard fixed brake disc construction
• the HOPE Fixed brake disc is designed for riders who are performance oriented and don't want to spend money on a semi-floating design
• laser-cut, heat-treated stainless steel brake surface
• increased disc thickness to 2.3mm and a 1.5mm run-out limit give this disc a long service life
• increased thickness to 2.3mm improves heat dissipation, allowing the disc to absorb greater thermal loads than less thick discs
• all HOPE Fixed discs are made of very strong and durable stainless steel alloy

Contents of the package

• 1x brake disc HOPE Fixed
• 6x T25 bolt for mounting on hub

Technical parameters

• available diameters = 140mm, 160mm, 180mm, 200mm, 203mm, 220mm
• max. braking surface height = 18,5mm
• default disc width = 2.3mm
• minimum disc width = 1.5mm
• disc mounting on hub = 6 screws (IS)

Weights

All weights listed below are exclusive of the 6 steel hub mounting screws included with the reel. These 6 screws weigh an additional 15g.

• 140mm - 88g
• 160mm - 110,5g
• 180mm - 177,5g
• 200mm - 223g
• 203mm - 226,5g
• 220mm - 268g

Note

The maximum tightening torque of the hub mounting screws supplied with the disc is 5Nm - do not exceed the maximum tightening torque as this could damage the aluminium sleeve and cause serious injury!