Brake disc MAGURA MDR-S 2.5, 6-bolts

MAGURA MDR-S brake disc is designed for the MAGURA GUSTAV PRO brake and the most demanding applications such as enduro, downhill and especially electric bikes. This brake disc is available in 180mm, 203mm. Increased disc thickness, which gives the disc a greater mass of metal that dissipates heat better. Thanks to the thicker disc wall, high thermal and thus braking stability has been achieved even during long braking and under high and prolonged loads such as electric bikes. The special grooving of the braking surface also reduces noise and vibration during braking and even the pad run-in time and the so-called bed-in process, which is now much shorter. This is a one-piece disc that can be mounted on any hub with a standard 6-bolt mounting.

• instructions for use are included as well as screws for attachment to the hub
• the time required for the bed-in process has been reduced for the MAGURA MDR-S 2.5 brake disc
• modulation of braking performance has been increased due to a larger and fuller braking area
• the greater disc thickness allows the disc to handle high temperature loads for longer periods of time
• designed for 6 bolt hub mounting
• MAGURA MDR-S 2.5 brake disc is coated against corrosion
• the disc is only compatible with the MAGURA Gustav PRO brake!

Contents of the package

• 1x MAGURA MDR-S 2.5 brake disc (of selected diameter)
• 6x T25 screw for attachment to the hub
• 1x installation instructions

Technical parameters

• available diameters = 180mm, 203mm
• default disc width = 2,5mm
• minimum disc width = 2,1mm
• attachment of the disc to the hub = 6-bolt (IS)

Weight

Weights listed below are exclusive of the 6 steel hub mounting screws included with the reel. These 6 screws weigh an additional 15g.

• 180mm = 219g
• 203mm = 266g

Note

The maximum tightening torque of the hub mounting screws supplied with the disc is 4Nm - do not exceed the maximum tightening torque!

Compatibility with MAGURA brakes

• MAGURA GUSTAV PRO