The MAGURA MT7 PRO hydraulic disc brake is the top model of the MAGURA MT Gravity series, a series of brakes designed for most demanding conditions from trials, enduro to downhill! The brake with 4-piston caliper offers great performance. Compared to the MAGURA MT5 brakes, MT7 PRO offers more power modulation and slightly increased stopping power. The lever body is made from MAGURA's Carbotecture SL® material, which offers reduced weight and increased strength over Carbotecture® which you can find on MT5 brake. The Carbotecture SL® lever body is supplied with an aluminium HC 1-finger lever. The caliper body is a single piece of cast aluminum with magnetic pistons that hold the attached brake pads in place! The lever can be used on the left or right side of the handlebar.
lever is equipped with EBT Torx T25 bleed screw (Easy Bleed Technology) for easy bleeding (see video below)
With the MAGURA MT7 PRO brake lever it is possible to adjust the distance of the lever from the handlebar without tools (by turning the wheel on the end lever)
the lever includes small stickers with the MT7 PRO inscription which can be exchanged for others, or you can design your own unique design (e.g. with your own name) using a MAGURA voucher for a custom sticker design
the caliper is equipped with magnetic Xchange pistons that hold the brake pads in place, so there is no need to use a spacer spring between the brake pads
banjo brake hose connection using a torx T25 wrench, which makes it possible to point the caliper hose in the right direction
post mount (PM) mounting of the brake caliper to fork / frame
the caliper is supplied with MAGURA 8.P pads or a model with Performance compound
this is a pad model where each piston is fitted with a separate pad and each piston works independently of the other
the MAGURA Performance compound is an organic all-rounder for any situation
the caliper is made of a single piece of forged aluminium and there is no loss of power as with a split caliper
M6 bolts are also included for attaching the caliper to the frame or fork (using a torx T25 wrench)
the brake is supplied with a 5mm diameter kevlar hydraulic hose
the length of the unshortened hose is 2200mm
parts for shortening the hose to the required length are also included (2x hose barbed fitting / 2x hose olive)
the brake is recommended to be combined with MAGURA Storm HC or MAGURA MDR-C or MAGURA MDR-C CL for Center Lock, which are available in diameters 160mm / 180mm / 203mm
for more demanding applications such as downhill or enduro, the unique MAGURA MDR-P or MAGURA MDR-P CL for Center Lock with aluminium cup and steel outer ring, available in 180mm / 203mm / 220mm diameters
weight of the whole brake is 255g including full length of hose, without disc and fixing M6 screws)
Included in package
1x brake MAGURA MT7 PRO | HC 1-finger lever
lever + hose + caliper with brake pads / filled with oil and ready to go
2x hose olive MAGURA
2x hose barbed fitting MAGURA
2x stopper against leakage of liquid from the hose when shortening it
2x M6 screw (torx T25) for tightening of caliper on frame / fork
2x washer below M6 screw
1x manual MAGURA MT
1x set of stickers MAGURA
2x yellow tranposrt and caliper spacer MAGURA between pads
Handlebar clamps for shifters (sold sepparately):
if you want to combine brake lever and SHIMANO or SRAM shiffter on one clamp, you need use special MAGURA Shiftmix clamp
For correct instalation please read the manual delivered with the brake! For proper instalation of the lever is necessary to mount the brake clamp correctly - with the arrows on the clamp (pointing up). There is necessary to tight the upper bolt on clamp so it touches the brake lever body without any gap! Than tight the bottom bolt to the maximum 4Nm! There will be small gap on bottom between the clamp and brake body. Overtightening can cause damage of the brake clamp or lever body! This overtightening is not covered with the warranty!
5-Year leak proof warranty
Magura offers 5 year leak proof guarantee! MAGURA grants the FIRST BUYER a 5-year leak proof guarantee on brake masters, calipers and cylinders if the brake is mounted on a bicycle as original equipment or has been purchased from a dealer as a retrofit. The guarantee is valid for five years from the date of purchase. Registration for the 5-year leak proof guarantee is not necessary.
Video - Installation
Video - Hose shortening
Video - Filling and bleeding
Video - Fast bleeding
Lever brake position
Brake caliper pistons
Brake model line
Trail / All Mountain
Brake caliper mount
Post Mount (PM)
Brake lever blade
Brake clamp material
Brake pad model
Brake pad compound
No customer reviews for the moment.
Your review appreciation cannot be sent
Are you sure that you want to report this comment?
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Your comment has been submitted and will be available once approved by a moderator.