-30%
Pack
-30%

Brakes HAYES Dominion A4 | black-grey | RRL + Brake discs HAYES D-Series (203mm+203mm)

Brakes HAYES Dominion A4 | black-grey | RRL standard lever | front + back

Brake HAYES Dominion A4 | black-grey | RRL standard lever

Brakes HAYES Dominion A4 | black-grey | RRL + Brake discs HAYES D-Series (203mm+203mm)

Reference: 95-36115-K003

Brand: HAYES

A set of disc brakes HAYES Dominion A4, which receives great feedback from every rider who tries it! The HAYES Dominion A4 4-piston brake can handle any demanding situation, from Trail riding, to All-Mountain, Enduro, Freeride and Downhill. This brake can handle a lot and features great technologies such as QuickBite² (very short deadstroke), a dual bleeding system, a cold-forged extremely strong caliper and DOT 5.1 brake fluid that can withstand high temperatures. The brake lever is Flip-Flop or reversible so you can use it on the left or right side of the handlebar. Included in the package are 2 HAYES Dominion A4 brakes including accessories and 2x HAYES D-Series discs.

Subscribe To When In Stock

You have successfully subscribed to this product

9,835 Kč

14,050 Kč

This pack contains

Brake HAYES Dominion A4 | black-grey Hose lenght-100cm HAYES lever blade-Regular reach

x 1

Brake HAYES Dominion A4 | black-grey Hose lenght-180cm HAYES lever blade-Regular reach

x 1

Brake disc rotor HAYES D-Series Rotor diameter-203mm

x 2

2 item(s) left in Stock!

Description
Product Details

Brake lever

brake lever body is made of forged aluminium alloy
Ergonomic aluminium brake lever with a very soft step thanks to the roller bearings
the end of the lever is fitted with small dimples at the end for firm contact between the gloved finger and the lever surface
the lever can be combined with adapters for attaching the gearshift directly to the brake lever sleeve
the lever can be used on the left or right side of the handlebar (flip-flop)
the lever can be removed from the handlebars without removing the grips or the shifter
precision engineered and tested hydraulic axial system using DOT 5.1 brake oil
Brake lever piston has a conical seal and a special slip ring to reduce friction
the HAYES Dominion A4 brake lever can be adjusted for the distance between the lever and the handlebars (by turning the wheel on the end lever)
with the HAYES Dominion A4 brake lever it is possible to adjust the dead lever step using a 2mm inbus key (by default the shortest possible step is set)
the HAYES Dominion lever has been designed to have the shortest possible deadstroke - i.e. the time without the onset of brake power (pad and disc contact)
the fluid reservoir is large so that there is no risk of air entering the system even with significant pad wear
Standard Reach Lever (RRL) = standard distance of lever blade from handlebars

Brake caliper

the caliper is made of cold forged aluminium
the caliper is made of two separate pieces and connected by two large screws
further increase in the strength of the caliper is provided by the locking screw of the plates called King Pin
The HAYES Dominion A4 caliper is a 4-piston caliper, i.e. it contains a set of 4 independent pistons
the large 17mm pistons give the brake high performance in all situations
the pistons are made of lightweight aluminium alloy to ensure rapid heat transfer to the caliper from where it is then transferred to the surrounding area
the pistons are fitted with a square (in cross-section) seal, which has specific elastic properties to maintain perfect retraction even at high pad run-out
the caliper is equipped with an expansion spring between the brake pads
the pads are secured in the caliper by a locking screw (HAYES King Pin)
the caliper is supplied with semi-metallic brake pads T106 (installed in the brake caliper), but also sintered pads T100
this is a version of the pads that is joined into one via 2-pistons on each side
WARNING: the pads must be run in before use, or the bed-in process (repeated running and smooth braking)
swivel banjo brake hose connection, which allows the hose to be directed away from the caliper and towards the wheel
post mount or PM mounting of the brake caliper
detailed adjustment of the caliper and alignment to the disc is possible by means of small worms on the post mount (crosshair system)
M6 screws for mounting the caliper to the frame or fork (using an inbus wrench) are also included
precision engineered and tested hydraulic system using DOT 5.1 brake oil
Two-Stroke bleed port system allows you to bleed separately without having to pull fluid through the lever

Brake hose

brakes are supplied with Kevlar hydraulic hose HAYES K8 with inner diameter (ID) 2.5mm outer diameter (OD) 5.5mm
the length of the unshortened hose is 1800mm (rear brakes) or 1000mm (front brake)
parts for shortening the hose to the desired length are also included in each pack of the brake (1x hose insert / 1x hose olive)

Disc otor

supplied with HAYES D-Series brake discs
default disc width = 1.95mm
minimum disc width = 1.7mm
disc mounting on hub = 6 screws (IS)

Weight

weight of whole brake is 310g (including 1000mm hose lenght and M6 tightening bolts, without rotor)
weight of single 203mm brake rotor = 188g (+15g bolts)

Package includes

1x brake HAYES Dominion A4 (with 1000mm hose lenght)
- lever + hose + caliper / filled and ready for immediate use
1x brake HAYES Dominion A4 (with 1800mm hose lenght)
- lever + hose + caliper / filled and ready for immediate use
2x disc brake rotor HAYES D-Series 203mm
2x HAYES hose olive
2x HAYES hose insert
4x M6 bolt (inbus 6mm) for tightening of the caliper on fork / frame
4x washer below M6 bolt
2x HAYES manual
2x HAYES transportation insert
2x HAYES bleed block with integrated caliper piston cleaning and lubrication system
2x semi-metallic brake pads HAYES T106
2x metallic brake pads HAYES T100