Olive for brake hoses Magura. Olive can be used for kevlar and also plastic Magura hoses. You will use this olive after cable shortening or new installation / replacement of master. Olive will press the hose inside the lever or caliper thanks to sleeve nut, so the hose is firmly connected to the...

Bleeding and filling bolt / barbed fitting MAGURA for all disc brakes Magura MT and Magura HS rim brakes. Bolt have a shorter thread M6 and it is supplied with 2x o-ring which better seals the system when connected to caliper. O-ring is possible to put on the bolt thread side. We recoomend to use...

Support sleeve (insert) for Magura disc brakes. You can use this support sleeve for all disc brakes from MAGURA MT family (excluding MT2 as this brake uses plastic hose without need of the support sleeve). Easy instalation in the hose without tools or with a small tap with a hammer. Olive and...

Original MAGURA 8.P Performance pads. The Performance plates are designed for those looking for a great dosing option. The pads offer the security of smooth braking action and ample stopping power. The pads can be fitted to MAGURA MT5 / MT TRAIL SPORT (front) / MT TRAIL CARBON / MT7 brakes

Original minerail oil Magura Royal Blood for hydraulic rim and disc brakes Magura MT and Magura HS (all models). Minerail oil Magura is a bit sparse than standard minerail oils, so the lever feel is less spongier and the lever response is faster. Even that is sparse, Magura Ryal Blood keeps...

Rotor adapter Magura model QM 44. Adapter QM 44 is made for PM frame / fork and also brake caliper mount. Thanks to this adapter you can reduce fork mount 180mm (PM 7") to rotor 203mm (PM 8"), or frame 180mm (PM 7") to 203mm (PM 8") rotor. With QM 44 adapter you can increase the rotor size for...

Spare part of HOPE hydraulic brake fittings number HBSP159 - hose olive. Thanks to the olive, the hose will be perfectly pulled onto caliper or lever and the brake system will be sealed at the connection of the hoses to the lever or caliper.

The great MAGURA MDR-P disc is designed for the most demanding applications such as enduro, downhill and electric bikes. Increased braking surface of the outer ring and an aluminium central carrier that dissipates heat better. Due to the increased surface area, pad wear has been reduced by 15%...

Spare original Magura bolt in bleed port Magura EBT for disc brake levers Magura MT (all models) and also for levers Magura HS33, HS33 R, HS22 and HS11. Small bolt is made from Carbotecture® and supplied with small sealing o-ring which keeps the fluid inside the braking system. BE AWARE!...

Original MAGURA 8.R Race pads. Race pads are designed for those looking for maximum braking performance. The pads offer an immediate supply of maximum stopping power and the full braking performance a brake can deliver. The pads can be fitted to MAGURA MT5 / MT TRAIL SPORT (front) / MT TRAIL...

Transport distance insert between brake pads for Magura MT brakes. This insert is specialy made for Magura MT brakes and it is same for 2-piston Magura MT and also 4-piston Magura MT brakes. This insert have many uses, not only for transport as a distance insert, but also to make bigger distance...

Original brake pads MAGURA 8.S Sport. Brake pads model 8.S Sport are made for those who are searching for great brake power which is comparable in dry and also dry conditions. Sport brake pads offer amazing durability and fading, so they are perfect for heavy electrobikes in combination with disc...

Bleed kit from MAGURA for disc brakes and rim brakes. Bleed kit type Medium is kompaktible with MAGURA MT and also MAGURA HS33, HS11 etc. Kit includes all necessary like 100ml mineral oil Royal Blood, M9 shroud nuts, barbed fittings, olives, syringes, hoses, torx T25 key and also plastic...

Copper washer or seal for HOPE brake lines. The gasket has the serial number HBSP161. The gasket is used to fit many types of HOPE brake lines. The gasket seals the connection perfectly to prevent any brake fluid leakage!

Spare part o-ring for brake hose Magura MT (bajo fitting). This o-ring is compactible with Magura MT4, MT5, MT6, MT7, MT8, MT Trail Sport. O-ring is sold singly.

Original minerail oil Magura Royal Blood for hydraulic rim and disc brakes Magura MT and Magura HS (all models). Minerail oil Magura is a bit sparse than standard minerail oils, so the lever feel is less spongier and the lever response is faster. Even that is sparse, Magura Ryal Blood keeps...

Brake pads Magura 9.P with Performance compound for 4-piston brakes Magura supplied standardly with brakes MT TRIAL SPORT. Brake pads Performance model are intended for those which searching perfect delivery of brake power with maximum control. Pads offers very constant brakeing power without...

The great MAGURA MDR-P disc is designed for the most demanding applications such as enduro, downhill and electric bikes. Increased braking surface of the outer ring and an aluminium inner ring that dissipates heat better. Due to the increased surface area, pad wear has been reduced by 15% and...

Replacement insert for brake hydraulic hose HOPE. HOPE spare part number - HBSP160. The support sleeve is designed for all types of HOPE hoses (steel braided and kevlar). The support sleeve is inserted into the inner bore of the hose and requires tightening with a olive (HBSP159) and a shroud nut...

Kevlar brake hose for MAGURA MT TRAIL SPORT/MT4/MT5/MT6/MT7/MT8 brakes. Black color, 2,5m lenght. Hose is supplied including barbed fittings on both sides for master cylinder and slave cylinder. In set is olive, aluminium banjo and torx bolt and o-rings.

Distancing spacer with 0,2mm hight for a centering of a brake caliper or differenc components. Can be used on many types of calipers with IS or PM mount. You can get most from the braking force if you pads contact the whole rotor surface. Spacer is made from steel and inner diameter is in size...

Copper washer or seal for HOPE brake lines. The gasket has the serial number HBSP26. The gasket is used to fit many types of HOPE brake lines. The gasket seals the connection perfectly to prevent any brake fluid leakage!

The MAGURA MT7 PRO hydraulic disc brake is the top model of the MAGURA MT Gravity series, a series of brakes designed for most demanding conditions from trials, enduro to downhill! The brake with 4-piston caliper offers great performance. Compared to the MAGURA MT5 brakes, MT7 PRO offers more...

Brake adapter Magura model QM 40. Adapter QM 40 is made for PM brake mount. Thanks to this adapter you can reduce fork mount 160mm (PM 6") to rotor 180mm (PM 7"), or 140mm (PM 5") to 160mm (PM 6") rotor. With this adapter is possible to increasse the size of the rotor for +20mm. Adapter is made...