Disc brakes

Secondary seal for HOPE Tech 3 brake lever piston with part number HBSP108. The conical shaped seal is specifically designed for the brake lever piston chamber of the HOPE Tech 3. The seal is made of rubber that is suitable for the use of DOT 4 or DOT 5.1 brake fluid.

Safety circlip for the HOPE Tech 3 lever pin. This circlip prevents the HOPE Tech 3 lever pin that connects the end lever to the brake lever body from popping out. The circlip can be put on and taken off by pulling it slightly apart with a pair of cotter pin pliers.

Replacement adjustable piston screw with round end for HOPE Trial Zone, HOPE Race Evo and HOPE Race levers. The adjustable screw is made of solid steel and by turning it, the distance of the lever from the handlebar can be adjusted. The lever distance is adjusted with an inbus wrench. HOPE spare...

HOPE All-conditions pads suitable for HOPE Trial Zone, HOPE Mono Trial brake caliper models. HOPE All-conditions brake pads are universal pads for all conditions and excel in dry, wet or mud conditions. HOPE All-conditions pads deliver stable performance and are HOPE's most versatile pad model....

Replacement roller for HOPE Trial Zone brake lever. The brass barrel is used for a smooth movement of the HOPE Trial Zone lever and holds the pressure pin in the correct position against the piston. HOPE part number HBSP100

Hollow bolt for HOPE banjo - part number HBSP47. The screw is designed for banjo connection of the hose to the caliper. The bolt is hollow with a hole to allow smooth flow of brake fluid between the hose and caliper.

Service and mounting tool (star) for HOPE brake calipers. With this unique tool it is possible to loosen the locking nuts to change seals or pistons. The tool can be threaded through a screwdriver or rod for better handling. This is the HTTCTD model Bore cap tool for HOPE brake types - Mono Mini...

Primary seal for HOPE Tech 3 brake lever piston with part number HBSP109. The conical shaped seal is specifically designed for the brake lever piston chamber of the HOPE Tech 3. The seal is made of rubber that is suitable for the use of DOT 4 or DOT 5.1 brake fluid.

Aluminium bolt in brake lever clamp HOPE model M5x16mm. HOPE number M516AL. Very light bolt with M5 hex key size M5. Bolt is silver color. Weight 1,5g (1pc bolt).

Replacement bolt for HOPE brakes, M3 x 6mm with torx head and internal mandrel to protect against tampering. The bolt can be used for fixing the HOPE brake lever piston stop or for other HOPE brake components. Replacement screw is sold in 1 piece.

Replacement torx bolt for HOPE brakes, size M3x8mm. The bolt can be used for fixing HOPE brake lever piston stop or for other HOPE brake components. Replacement screw is sold in 1 piece.

Spare part HOPE for brake lever HOPE Tech 3. Brake lever pivot bushing. Bushing is made from durable plastic which perfectly fit in to brake lever body. HOPE spare part number HBSP313.

Brake caliper HOPE Trial Zone | NO.9 | including pads. Caliper with Post Mount (PM). Caliper comes with all-conditions organic compound pads (red). The Trial Zone brake caliper can be combined with Trial Zone, Tech 3 or Tech 4 levers. Specifically large pistons with a diameter of 25mm give very...

Replacement seal for HOPE caliper, part number HBSP207. This seal is compatible with the HOPE Trial Zone caliper. The seal is designed for DOT 4 or DOT 5.1 brake fluid and 25mm HOPE pistons. If you're looking to reseal your brake caliper's HOPE caliper, this is exactly what you need. For one HOPE...

Copper washer or seal for HOPE brake lines. The gasket has the serial number HBSP161. The gasket is used to fit many types of HOPE brake lines. The gasket seals the connection perfectly to prevent any brake fluid leakage!

Spare part for brake lever HOPE Trial Zone or expansion reseroir diaphragm seal HOPE Trial Zone. Spare part number HOPE - HBSP193. The diaphragm prevents the lever system from aerating and keeps contaminants out of the expansion tank. The seal is made of flexible rubber that can be used in...

Straight HOPE fitting connector for 5mm brake hoses - part number HBSP163. The connector is designed for all types of HOPE hoses (braided and Kevlar). The connector is fitted to HOPE brake levers and connects the hose to the brake lever using copper seals. The connector is tightened with a...

Spare part for HOPE brake lever. HBSP269 is the brake lever pivot circlip that prevents the pivot that connects the brake lever to the reservoir from popping out. The circlip is made of steel and can be threaded onto the pivo using special circlip pliers. The circlip pin is compatible with HOPE...

Genuine HOPE brake hose for all HOPE brake types. Outer diameter 5mm. Inner plastic line, Kevlar sheathing and outer covering with plastic-rubber tubing to prevent puncture and damage to the hose. The hose is very strong and hardly stretches at all even under high pressure! The hose can be...

Replacement lever blade for HOPE Tech 3 brake lever. The lever blade is CNC machined from solid aluminium alloy. The lever blade is equipped with small dimples at the end to increase the stability of the finger on the brake lever against slipping, e.g. in wet or humid weather. The HOPE Tech 3...

Replacement insert for brake hydraulic hose HOPE. HOPE spare part number - HBSP160. The support sleeve is designed for all types of HOPE hoses (steel braided and kevlar). The support sleeve is inserted into the inner bore of the hose and requires tightening with a olive (HBSP159) and a shroud nut...

Spare part of HOPE hydraulic brake fittings number HBSP159 - hose olive. Thanks to the olive, the hose will be perfectly pulled onto caliper or lever and the brake system will be sealed at the connection of the hoses to the lever or caliper.

Original MAGURA 8.S brake pads - organic Sport compound. This compound is ideal for use with electric bikes due to its braking capabilities, high heat resistance, shorter break-in time and long service life. MAGURA 8.S Sport pads are designed for riders who "stand" a lot on the brakes and require...

Original MAGURA 9.P brake pads - organic compound - Performance. These are two plates joined into one and with hooks for securely catching in the stirrup in place of the fixing bolts. The MAGURA Performance model pads are designed for those looking for great dispensing ability and stable...