Distancing spacer with 0,2mm hight for a centering of a brake caliper or differenc components. Can be used on many types of calipers with IS or PM mount. You can get most from the braking force if you pads contact the whole rotor surface. Spacer is made from steel and inner diameter is in size for M6 bolts.
Original spare parts for disc brake Magura MT and also hydraulic rim brakes Magura HS11, HS22, HS33. Bolts, washers, connectors and mounts, closing bolts, sealings and other small parts for Magura brakes.
There are 17 products.
Olive for brake hoses Magura. Olive can be used for kevlar and also plastic Magura hoses. You will use this olive after cable shortening or new installation / replacement of master. Olive will press the hose inside the lever or caliper thanks to sleeve nut, so the hose is firmly connected to the Magura lever or caliper. Olive is made from soft metal, so...
Washer for MAGURA EVO2 adapter booster of hydraulic rim brakes MAGURA HS11, HS22, HS33. Washer is used below the bolt head which tighten the booster to the MAGURA EVO2 adapter (upper bolt). Sold by 1pc of washer.
M6 screw for mounting MAGURA EVO2 adapters on V-Break / Cantisocket. The screw is supplied with a washer and is used for fixing the bottom part of the adapters. The screw is suitable if you are using EVO2 adapters without quick-release mechanism. The screw is suitable for all MAGURA HS or HS11, HS22, HS33 brakes that use EVO2 adapters.
Náhradní díl k ráfkovým hydraulickým brzdám Magura HS33 nebo kotoučovým brzdám typu Magura MT. Krytka hadičky brzdové páky, která zabraňuje jejímu přeražení u šroubení hadičky. Krytka se na šroubení nasouvá a pevně jej obepne.
Magura rim brake washer for Magura hydraulic rim brakes HS11, HS22, HS33 calipers. Washer is made from durable plastic and it is mounted directly on the calipers body. You can adjust the distane and angle of the calipers easily thanks to the washer. Also the washer helps to keep the calipers firmly in the brake mounts. Washer is uses inside the Magura IDM...
Barbed fitting (insert) for Magura disc brakes. You can use this insert for all disc brakes from Magura MT family (excluding MT2). Easy instalation in the hose without tools or with a small tap with a hammer. Olive and shroud nut is sold separately.
Spare original MAGURA bolt in EBT bleed port for disc brake calipers MAGURA MT (all models 2015 / 2017 / 2019 / 2-piston / 4-piston). Small bolt is made from steel and keeps the fluid inside the braking system. BE AWARE! Tightening torque of this bleed port bolt is max. 4Nm, or you can damage it!
Bleeding and filling bolt / barbed fitting MAGURA for all disc brakes Magura MT and Magura HS rim brakes. Bolt have a shorter thread M6 and it is supplied with 2x o-ring which better seals the system when connected to caliper. O-ring is possible to put on the bolt thread side. We recoomend to use transparent bleeding hose. Bolt is supplied as 1pc (1pc of...